A
high alkaline steam cleaner and
pressure
washer concentrate. Contains an
inhibitor to
lessen alkali attack on aluminum and
other
soft metals. An excellent kitchen
and food
plant cleaner. Rinse after use.
Cleans
engines, machinery, industrial
floors, vent hoods, fans etc. Dilute
from 1:5 to
1:20 with water, depending on soil.
An ambercolored
penetrating liquid with no odor.
USDA
Authorized (A-1). pH full strength =
13, 1:32
= 12.5.
1234 CLING
& CLEAN II.
COMMERCIAL HOOD AND VENT CLEANER
Oven
cleaner and degreaser, highly
viscous and
solvent cleaner which adheres to
vertical surfaces.
Unequaled as a clinging oven
cleaner, excellent for hood and vent
cleaning,walls,
floors and all cooking appliances.
Will
remove baked on carbon or protein
grease.One
of the few degreasers that will
clean and
remove vegetable and peanut oils,
such as those
used in Chinese restaurants.
Outstanding
quality and value. USDA (A-4, A-8)
pH
full
strength = 14.
1363 BRUTE
Our
premiere, best selling, non-butyl
degreaser. A strong alkaline cleaner
containing d-Limonene
solvent in place of butyl.
Non-phosphate, non-caustic, non
hazardous, non- corrosive,
non-polluting and
environmentally friendly. Safe on
aluminum. Removes industrial
oils and greases from washable
surfaces.
8427 E-Z CLEAN
An
extra strength powerhouse all
purpose
cleaner and degreaser. Dilution
rates go from1
oz. per gallon to 16 oz. per gallon
of
water, depending on the type of
soils and the method of cleaning.
Contains
potassium oxide and alkanolamine for
extra power. Avoid contact with
aluminum.
Can be used in pressure washers and
steam jenny’s. pH full strength
= 13.5 to 14; 1:32 = 12.5.
8424 POWER
DEGREASER
Our
best alkaline and butyl all purpose
cleaner
and degreaser for use in hard water
and under
the worst conditions. Chelating
agents
and water conditions boost the
cleaning performance,
wetting, foam and rinseability.
Excellent in pressure washers. pH
full strength
= 13.5–14.0; 1:32 = 11.5-12.0.
1633
GREASEBUSTER
A
pure, natural citrus d-limonene
solvent,
biodegradable, for heavy duty
degreasing, drain
opening, deodorizing. Non-corrosive,
non-caustic, non-acid; no petroleum
distillates, no chlorinated
solvents. Use
full strength or dilute with water
for economy; rinses off with water.
Flash
point over 110° F. Has high
solvency power. Pre-test
before using
on plastics. Excellent tar and road
oil
remover. Cleans off forklift tire
marks on cement.
100% biodegradable. The best product
available for removing adhesive and
glue.
99303 DIESEL
SMOKE REMOVER
A
concentrated alkaline cleaner
containing a
blend of nonionic and anionic
surfactants, di-phase
solvents and wetting agents which
rapidly dissolves, emulsifies and
removes diesel smoke, road film and
other
petroleum type soils from aluminum,
paint, chrome and other metal
surfaces. Use
on transportation equipment, such as
trucks, trailers, railroad stock
cars and
other hard surfaces. Diesel Smoke
Remover can be applied with a
pressure
washer, steam cleaner, pressure
spray tank, brush wash or other
washing system
and is effective even in hard water.
Best when rinsed with clean water. A
strong grease remover. Our best
transportation cleaner for diesel
smoke.
1043
BREAK-THRU
Exterior
vehicle wash. Use with hot or cold
water. Use with pressure washers,
brush systems, or by hand. Leaves
painted
surfaces with a thin polymeric wax
coating. Surfaceshave
a shiny, waxed appearance. It does
not
emulsify oil and grease and soils
fall out of suspension
for use in recycling systems.
Biodegradable, non-phosphate,
no-solvents. Dilute 1:25 for
pressure washers or
by hand and 1:50 to 1:100 with
brushes. pH 1 to 10 = 11.5.
99302 TRUCK
WASH II
A
red, acid free, cleaning
concentrate. A carefully
balanced formulation of
alkalies, sequesterants,
emulsifiers, wetting agent and
synergist. It will remove oils,
grease and road
film from truck bodies and cabs. It
will
degrease motors when used in
steam cleaners
or when brushed with hot water.
Should be used with warm or hot
water. Our best wash for industrial
users.
Ideal for large truck wash
facilities. Also used as step two