A
water based polymeric liquid coating,
which forms a weather resistant,
nearly invisible coating on hard,
somewhat porous surfaces such as
brick, mortar, concrete and block.
Keeps graffiti from bonding
permanently to the protected surface.
Apply to clean surfaces which are free
of graffiti, by brush, roller or
sprayer (garden type pump up sprayer
is ideal). GRAFFITI PROOF forms a
removable, sacrificial coating. After
the protected surface is defaced with
graffiti, remove the GRAFFITI PROOF
and easily flush away the graffiti at
the same time. Remove the GRAFFITI
PROOF by stripping with HOT SHOT
STRIPPER (see below). The ideal
removal is by using a hot water
pressure washer after spraying the HOT
SHOT directly on the wall. When dry,
reapply another coat of GRAFFITI
PROOF. GRAFFITI PROOF will remain on
the surfaces even in bad weather and
should only need to be reapplied after
removal or every 18 months.
1553 HOT SHOT
STRIPPER
Our
specifically formulated remover for
GRAFFITI PROOF. Spray onto graffiti
defaced surfaces which have previously
been protected with GRAFFITI PROOF
using a pump up type sprayer full
strength or using a pressure washer
metered to dilute 1 part HOT SHOT to
five parts of hot water. This will
remove the sacrificial coating and the
graffiti. Rinse with plain water.
Allow surface to dry, then reapply
GRAFFITI PROOF.
1633
GREASEBUSTER
Contains
a pure, natural citrus d-limonene
solvent, biodegradable, for heavy duty
degreasing, drain opening,
deodorizing, non-corrosive,
non-caustic, non-acid; no petroleum
distillates, no chlorinated solvents.
Use full strength or dilute with water
for economy; rinses off
